Use this hookup if:
;You subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels, and
;You do not intend to hook up any other audio or video equipment to your LCD projection TV.
When all channels are routed through your cable box, only one unscrambled channel is sent to the LCD projection TV, so you cannot use the Twin View feature. If some channels are scrambled, but others are not, consider using the hookup on page 26 instead.
Connect the coaxial connector from your cable service to the cable box's IN jack.
Using a coaxial cable, connect the cable box's OUT jack to the LCD projection TV's VHF/UHF jack.
Cable
_ | _/@ | Rear of LCD projection TV |
VHF/UHF
INOUT
Cable box
Also, set Cable to On in the Channel menu (see page 76).
Your Sony remote control can be programmed to operateyour cable box (see "Programming the Remote Control" on page86).
To change channelsusing the cable box, setyour LCDprojection TV to channel 3 or 4 dependingon the cable box channel output. If you will be controlling all channel selection through your cable box, consider using the ChannelFixfeature to setyour LCDprojection TV to channel 3 or 4 (see page76).
Setting the Channel Fix feature in the Channel menu (see "Using the
Channel Menu" on page 76), ensures that you do not accidentally switch the channels using your LCD projection TV.
28