Cable and Antenna
Cable Box
Connections
If your cable provider does not feature local channels, you may find this set up convenient.
CATV cable | AUX |
| |
(No connection | to |
TO CONVERTER) | Rear of LCD projection TV |
Antenna cable | CONVERTER |
|
VHF/UHF
Select CABLE or antenna (ANT) mode by pressing ANT on the remote control.
4% To receivechannelswith anantenna,you needto turn your Cableto Off (see page76) and perform the Auto Program function (see page 76).
This is the preferred basic cable TV hookup to use if:
:Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and
:You want to enjoy the Twin View feature.
With this setup you can:
:Use the LCD projection TV remote control to change channels using your cable box when the signal is scrambled.
:Use the LCD projection TV remote control to change channels using your LCD projection TV when the signal is not scrambled. (Your LCD projection TV's tuner provides a better signal than the cable box.)
:Use the Twin View feature. (When all channels are routed through your cable box, only one channel is sent to the LCD projection TV, so you can not use the Twin View feature for your cable box.)
Connect the Cable TV cable to the LCD projection TV's VHF/UHF jack.
Using a coaxial cable, connect the LCD projection TV's TO CONVERTER jack to the cable box's IN jack. The LCD projection TV's internal converter allows you to switch between unscrambled signals coming straight into the LCD projection TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.
26