3
4
1
If you have video equipment that you want to control with the LCD
projection TV's remote control, use the following procedures to program the remote control.
The equipment must have infrared (IR) remote capability in order to be used with the remote control.
From the "Manufacturer's Codes" listed on page 87, select the
Press CODE SET.
Press the desired FUNCTION button.
Input the
Press ENT.
When no code number is input for 30 seconds or invalid or incorrect
numbers are input, the remote control is resetto the normal TV remote control mode.
]: If more than one code number is listed, try entering them one by one until you come to the correct code for your component.
:If you enter a new code number, the code number you previously entered at that setting is erased.
:In some rare cases, you may not be able to operate your component with
the Sony remote control. In this case, use the component's own remote control unit.
86