Enterasys Networks 9033348-02 manual Overview of Connecting Cables to the Access Point

Overview of Connecting Cables to the Access Point

Overview of Connecting Cables to the Access Point

Before cabling the Access Point, you should install the Access Point to a wall or ceiling. For detailed hardware installation procedures, see the RoamAbout Access Point 2000 Hardware Installation Guide. Figure 2-1provides you with an illustration of the steps listed in the following procedure.

1.Insert the PC Card into the Access Point. Refer to the RoamAbout 802.11 PC Card Installation Guide for Regulatory and Installation information before installing the PC Card.

Figure 2-1: Access Point 2000 Installation Overview

	5
	8
6	To Power Outlet
	3	2
Insert Ethernet
Cable from
Network		To Lightning
		Protector

7MAC

Address 4

MAC

ADD

SN

1

S1

S2

com/wireless	TUV
	2
	1

2-2 Access Point Placement and Configuration