Lightning Protector Installation
To install the RoamAbout Lightning Protector, perform the following steps:
1.Determine a suitable location for the Lightning Protector as described in Chapter 2.
2.As shown in Figure
3.Use a
4.Secure bolt (B) to the bracket using washers and locknut (D).
5.Loosely install washers and hexnut (G) onto the RoamAbout Lightning Protector (E).
6.Insert the Lightning Protector into the opening in bracket (A).
7.Tighten hexnut (G) to secure the RoamAbout Lightning Protector in its position, and ensure that the Protector is properly connected to the grounding system.
To avoid damage to the RoamAbout equipment, always install the RoamAbout Lightning Protector between the outdoor antenna installation and the RoamAbout Access Point or other computing device connected to the outdoor antenna.
Figure 3-2: Lightning Protector Installation
E
BA
F
C
D G
Antenna Installation