Enterasys Networks 9033348-02 manual Overview of the Access Point Configuration

Overview of the Access Point Configuration

d)Enter the wireless MAC addresses of the other Access Points. Click OK when done. Then click OK in the Wireless Parameters dialog box.

11.For all other Access Points, select LAN-to-LAN Endpoint in the Bridge Mode field. In the Wireless MAC Address field, enter the wireless MAC address of the remote Access Point (Point-to-Point) or central Access Point (Point-to-Multipoint).When done, click OK in the Wireless Parameters dialog box.

12.In the main window, click the Reset button. Choose to Reset with Current Settings. Allow approximately one minute for the Access Point to reset and run its self-test.

2-6 Access Point Placement and Configuration