Panasonic DMR-PWT530, DMR-PWT635 operating instructions Network

Convenient functions

Changing the unit’s settings (Setup)

Network

Easy Network Setting

Press [OK] to start Easy Network Setting. (> 21)

Network Settings

LAN Connection Mode

Select the LAN connection method.

•[PWT530] “Wireless” is enabled only when the Wireless LAN adaptor DY-WL5 (optional) is connected.

Wireless Settings

This allows to set and check the connection settings of the Wireless router.

e.g.,

Wireless Settings

Connection Setting

Double Speed Mode Setting ( 2.4GHz )

The current connection settings and status are displayed.

Current connection settings
Network name
( SSID )
Wireless type	802.11n (2.4GHz/20MHz)
Authentication type
Encryption type	AES
Current status
Connection status	Connected
Reception

  

1Encryption type

2 Reception

3 Type of wireless router

Connection Setting

The Wireless router connection wizard will be displayed.

Double Speed Mode Setting ( 2.4GHz )

When a 2.4 GHz wireless format is used, this setting sets the connection speed.

•If you connect using the “Double Speed Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or the connection to become unstable.

IP Address / DNS Settings

Check the connection of the network or set the IP address and DNS.

•To set the IP address and DNS

1Set “IP Address Auto-assignment” and “DNS-IP Auto-assignment” to “Off”.

2Select the item, then press [OK] to show the respective setting.

•When the router’s DHCP server function is not activated, check the numbers of other connected devices such as personal computers, then assign a number different from those of other devices for the “IP Address” and assign the same number for “Subnet Mask” and “Gateway Address”.

Proxy Server Settings

Check and set the connection to the Proxy server.

• Press [OK] to show the respective setting.

Network Service Settings

Lock

You can restrict using VIERA Connect.

• PIN is required to change. (> 24)

Automatic Volume Control

Volume is adjusted automatically to the standard volume while using VIERA Connect.

•Depending on contents, this function will not work.

•Select “Off” when the audio is warped.

78 VQT4L30