Panasonic Complete Manual for HDD Recorder Remote Codes

Remote Control

Change the remote control code on the main unit and the remote control if you place other Panasonic products close together.

•Use “Set Code1”, the factory set code, under normal circumstances.

1Select the code, then press [OK].

2While pressing [OK], press and hold the number button ([1] to [6]) for more than 5 seconds.

3Press and hold [OK] for more than 5 seconds.

4Press [OK].

Clock

If the time is not set correctly, use the settings listed in the method below.

•Automatic

This unit usually obtains time and date information from digital broadcasts.

•Time Zone

When the time is not correct, set “Time Zone”. (GMT - 6 to + 6)

•Manual Setting

1 Select “Off” of “Automatic”, then press [OK].

2 Select the item you want to change.

3 Change the setting.

4 Press [OK] when you have finished the settings.

Convenient functions

Owner ID

In order to prevent another person from using this unit if it is stolen, you can set a PIN and input your personal information (NAME, HOUSE NO, POSTCODE).

Once the PIN has been set, you cannot return to the factory preset. Make sure not to forget this.

PIN Entry

You can set/change the PIN for parental control.

1Enter your 4-digit PIN with the number buttons.

2Enter the new 4-digit PIN with the number buttons.

• Make a note of PIN in case you forget it.

e.g.,

PIN Entry

Remember the PIN.

0 0 0 0

OK

3 Press [OK].

VQT4L30 81