Panasonic DMP-BDT230, DMP-BDT330 Connecting to an amplifier/receiver, Hdmi AV OUT

Connecting to an amplifier/receiver

Perform either one of the following connections in accordance with your amplifier/receiver input terminal.

HDMI AV OUT

[BDT330] Use HDMI AV OUT MAIN terminal.

HDMI cable
(supplied)	HDMI cable

HDMI IN	HDMI OUT
		(ARC)

HDMI IN

(ARC)

[BDT230] Amplifier/receiver

≥Set “Digital Audio Output” (> 31).

≥When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV, then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.

≥When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.

HDMI AV OUT SUB [BDT330]

You can enjoy richer sound by using the HDMI AV OUT SUB terminal.

HDMI cable (supplied) HDMI cable

HDMI IN

HDMI IN

Amplifier/receiver

≥Set “HDMI(SUB) Output Mode” to “V.OFF(Video Off)”. (> 31)

– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.

≥It is possible to play back 3D videos and 3D still pictures when the connected TV is 3D compatible, even if the amplifier/receiver is not 3D compatible.

≥The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (> 27). The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.

12 VQT4W95