Panasonic DMP-BDT230, DMP-BDT330 Precautions, For the AC mains plug of three pins

Page 2

Precautions

WARNING

Unit

To reduce the risk of fire, electric shock or product damage,

Do not expose this unit to rain, moisture, dripping or splashing.

Do not place objects filled with liquids, such as vases, on this unit.

Use only the recommended accessories.

Do not remove covers.

Do not repair this unit by yourself. Refer servicing to qualified service personnel.

Do not let metal objects fall inside this unit.

Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

Ensure that the power supply voltage corresponds to the voltage printed on this unit.

Insert the mains plug fully into the socket outlet.

Do not pull, bend, or place heavy items on the lead.

Do not handle the plug with wet hands.

Hold onto the mains plug body when disconnecting the plug.

Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

Small object

Keep the Memory Card out of reach of children to prevent swallowing.

CAUTION

Unit

This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Do not place sources of naked flames, such as lighted candles, on this unit.

This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

[For[Australia[and[New[Zealand]

This unit is intended for use in moderate climates.

[Except[Australia[and[New[Zealand]

This unit is intended for use in tropical climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.

Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a fire.

Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

Do not mix old and new batteries or different types at the same time.

Do not heat or expose to flame.

Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

Do not take apart or short circuit.

Do not recharge alkaline or manganese batteries.

Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

(For the AC mains plug of three pins)

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A

Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A

Fuse

Figure B

Fuse

(5 ampere)

 

(5 ampere)

 

 

2 VQT4W95

Image 2
Contents Operating Instructions Blu-ray DiscTM Player Precautions For the AC mains plug of three pinsTo dispose or transfer this unit Restriction on use of unauthorized copied contentWireless LAN connection Table of contents Accessories Unit and media careDevice Media markings Device types Contents format Playable mediaFinalize Discs that cannot be played by this UnitRegion management information BD-VideoUSB device BD-RE, BD-RGetting started Standby/on switch Í/I FortheMiddleEast ForSouthEastAsiaConnecting to an amplifier/receiver Hdmi AV OUTOptical Connecting to the network LAN cable connectionEasy Network Setting SettingsEasy Settings Wired connectionFirmware updates SsidReprogramming the remote control Inserting or removing mediaHome menu Personalizing a new user Multi User ModeSwitching the user Playback Operations during playbackShow top menu/pop-up menu Displaying menus and playback informationEnjoying 3D video and photos Show the status messagesDeleting data on the USB device Enjoying BD-LiveSlideshow Viera Connect Enjoying Internet Service Press Miracast Operate the Miracast compatible device Home Network featureUsing MiracastTM To exit from MiracastPlaying back contents on the Dlna server Using the Digital Media Controller Possible applications≥ Press the red button on the remote control Automatic input switching Power on linkPower off link Again to cancelOption menu Operation Menu3D Settings Picture SettingsSound Settings Setup menu PictureSound DTS Neo6 PCM Down ConversionDownmix 3D BD-Video PlaybackLanguage NetworkRatings System Firmware Update Unit SettingsRemote Control ¾ Automatic Update CheckCannot eject disc Troubleshooting guideGeneral operation 3D video is not output Video is not output. BDT330Video is not output in high-definition 3D video is not output correctly as 2DAudio PlaybackCan’t connect to the network Cannot play current titleOn the unit’s display MessagesOn the TV Start UPD/  stands for a numberFile format SpecificationsGeneral Display languages list Language code listAudio information Supported format for DlnaReference Page Limited Warranty only for Australia Panasonic WarrantyPanasonic Corporation Web Site http//panasonic.net
Related manuals
Manual 48 pages 21.76 Kb