Messages
Check the following when messages or service numbers are displayed on the screen or unit’s display.
On the TV
Cannot play.
¾You inserted an incompatible disc.
Cannot play on this unit.
¾You tried to play a
¾
No disc inserted.
¾The disc may be upside down.
$This operation is not available.
¾Some operations are unsupported by the unit. (For example, reverse slow motion, etc.)
IP address is not set.
¾The “IP Address” in “IP Address / DNS Settings” is
The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.
¾Set a stronger network security level referring to the wireless router operating instructions.
On the unit’s display
NET
¾While connecting to a network.
No PLAY
¾There is a viewing restriction on a
¾The media is dirty or badly scratched. The unit cannot play.
REMOVE
¾The USB device is drawing too much power. Remove the USB device.
SET
(“ ” stands for a number.)
¾The remote control and this unit are using different codes. Change the code on the
remote control.
Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.
U59
¾Temperature of this unit is hot and the unit switches to standby for safety reasons. Wait for about 30 minutes.
Select a position with good ventilation when installing the unit.
Hor F
(“ ” stands for a number.)
¾There is something unusual.
¾Check the unit using the troubleshooting guide. If the service number remains displayed, do the following.
1 Disconnect the plug from the household mains socket, wait a few seconds, then
reconnect it.
2Press [Í/I] to turn the unit on.
If the service number remains displayed despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.
Reference
VQT4W95 41