Adjusting the LCD screen angle
AOpen the screen. B Standard
C Free
D Compact
Preparing the Power Supply
Using the unit connected to the AC adaptor
1
To a household
AC outlet
32
AC power supply cord | AC adaptor | |
(included) | ||
(included) | ||
|
The unit is in the standby condition (the [Í] indicator lights) when the AC power supply cord is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
To conserve power
This unit consumes 0.5 W (Approximately 5 W when Quick Start is set to “On”) of power even when turned off. When the unit is not going to be used for a long time, disconnect the AC power supply cord from the household AC outlet.
When moving the unit:
≥Close the LCD screen. Don’t hold by the LCD screen.
About the LCD screen
There may be 0.01 % or less chance of missing or constantly turned on pixels, but this is not a malfunction.
Attention
Do not place the unit with the LCD
Doing so may scratch the surface of the LCD and around the LCD.
Using the battery pack
This unit can be used in places without an AC outlet, such as outdoors, by attaching the included battery pack.
≥The battery is not charged at the time of purchase. Charge before initial use.
≥The battery is designed only for use with this unit. It cannot be used with other equipment.
∫Attaching the battery pack
Turn the unit off before attaching or detaching the battery pack.
Bottom side of this unit
|
RELEASE
DETACHATTACH
RELEASE
DETACHATTACH
Battery pack (included)
VQT2H71
1Bring in from the left, aligning the grooves.
2Slide all the way to the right until you hear a "click". Check to make sure it is securely fastened.
10