Panasonic DMP-B100 operating instructions Sound, Card, Other difficulties with playback

Page 31

Sound

No sound from the unit’s speaker.

¾The speaker is off if headphones are connected.

¾Turn up the volume. (> 14)

Cannot hear the desired audio type.

¾Press [AUDIO] to select the audio. (> 17)

Cannot switch audio.

¾There are discs for which audio cannot be changed because of how the disc was created.

Card

Music on an SD card cannot be played.

¾Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data. (> 7)

The contents of the card cannot be read.

¾The card is not compatible or the contents on the card may be damaged. (> 7)

¾Turn off and then turn on the unit again.

Other difficulties with playback

Audio and video momentarily pause.

¾This occurs between playlist chapters or scenes ([AVCHD]).

¾When playing a title recorded on both layers, the unit automatically switches between layers and plays the title in the same way as a normal program. However, video and audio may momentarily cut out when the unit is switching layers.

Angle cannot be changed.

¾Angles can only be changed during scenes where different angles are recorded.

The resume play function does not work.

¾The memorized position is cleared in the following instances: j[∫] is pressed several times.

jThe disc or SD card is removed.

jThe unit is turned off during SD card playback.

jThe unit is turned off due to such occurrences as power outage, the removal of the AC adaptor or waste of the battery pack’s remaining power when the unit is turned on.

¾The resume play function may not work depending on the media.

¾[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.

You have forgotten your ratings password.

¾While the disc and SD card are removed, press and hold [:] (SKIP) and [SUB MENU ] on the unit at the same time for more than 5 seconds. Turn the unit off. “DVD-Video Ratings” and “BD-Video Ratings” will return to the default settings.

When a recorder or player etc. is operated with a remote control, the unit is also simultaneously operated.

When the unit’s remote control is operated, other Panasonic recorders or players etc. are also simultaneously operated.

¾Change the remote control codes on the Panasonic recorders or players.

BD-Video or DVD-Video is not played.

¾Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is not defective. (> cover)

¾You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting. (> 24)

Picture-in-picture is not played with BD-Video.

¾Confirm whether the disc supports picture-in-picture.

Alternative soundtrack and subtitles cannot be selected.

¾The languages are not recorded on the media.

¾You may not be able to use the on-screen menu to change the soundtrack and subtitles on some discs. Use the disc’s menus to make changes. (> 14)

No subtitles.

¾Subtitles are not recorded on the media.

¾Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”. (> 22)

Reference

VQT2H71

31

Image 31
Contents Region management information PANA7262 Warranty can be found onIf you have any questions contact Bottom of product Important Safety InstructionsFor USA-California Only BatteriesAC adaptor Listening cautionAccessories Table of contentsDisc and card handling Firmware updatesMaintenance Unit and media careRR/rRW/rR DL Media Disc and card informationCommercially sold discs User recorded mediaDiscs that cannot be played in this unit SD cardsOverview Charge indicatorUnit Range of use Remote controlInsert the button-type battery included Remote control transmitterUsing the battery pack Adjusting the LCD screen anglePreparing the Power Supply Using the unit connected to the AC adaptorPress SUB Menu while the power is On Connecting the included Car DC AdaptorDetaching the battery pack Checking the remaining battery chargeTurn the unit off automatically Easy SettingTurning on/off the unit Showing Function MenuSD card Adjusting the pictures on the LCD screenLoading the disc or SD card DiscBasic play Playing video contents DVD-VR Avchd To switch from other menus to Avchd or MPEG2 menuChapter playback To return to the previous screenOther operations during play DVD-VR MPEG2 Screen AspectStatus messages Changing audioUseful functions during still picture play Playing still picturesTo select the still pictures in another folder Press 3, 4, 2, 1 to select Set and press OK RotateZoom out Press 3, 4 to select Zoom out and press OKPress 3, 4 to select the track and press OK To switch from other menus to MP3 menuPlaying music Insert a discFormatting SD cards/Deleting data Signal TypeWhat is BONUSVIEW? Enjoying Bonusview in BD-VideoOn-screen menu operations Changing settings with the on-screen menuAudio PlayVideo Press 3, 4, 2, 1 to select the option and press OK Changing the unit’s settingsSetup menu operations Summary of settingsDisplay TV Aspect SettingOthers Extension Files must have the extension .mp3 or MP3 File format≥ Discs must conform to UDF SD card Structure of folders that can be played in this unitDVD-R/DVD-R DL/CD-R/CD-RW BD-RE/DVD-RAMIndicators Indicators and screen messagesScreen messages Visit our website to find a service center Troubleshooting guidePower To reset this unitOperation Card SoundOther difficulties with playback Specifications Glossary Licenses Language code listContact Information cdrequest@am-linux.jp Model Number Limited WarrantyProduct or Part Name Parts Labor As of NovemberIndex