Panasonic DMP-B100 Connecting the included Car DC Adaptor, Detaching the battery pack

Page 11

Detaching the battery pack

Bottom side of this unit

2 Slide.

RELEASE

DETACHATTACH

1Press and hold.

When not using for long periods of time

Detach the battery pack (> above).

(Even when the unit is turned off, there is a small amount of voltage running through the unit, and this may result in a malfunction.)

Recharge the battery for re-use.

Connecting the included Car DC Adaptor

Before connection, consult your car owner’s manual or your dealer.

Connect to the cigarette lighter socket of a vehicle that has a 12 V battery. It is not compatible with a vehicle that has a 24 V battery.

This is a special negative grounded Car DC Adaptor. Using this Car DC Adaptor with a plus grounded car can cause malfunction and lead to fire.

Car DC Adaptor (included)

12

Getting started

Recharging the battery pack

Attach the battery pack and connect the AC adaptor (> 10).

The [CHARGE] indicator lights while charging the battery, and the [CHARGE] indicator turns off when battery charging is finished.

[CHARGE] indicator (Orange light)

Approximate recharging and play times

(Hours)

 

 

 

 

Play*2

 

 

Recharging*1

 

LCD brightness level

 

 

 

s5

 

0

 

r5

 

 

 

 

 

 

 

 

5

3.5

 

3.25

 

3

 

 

 

 

 

 

*1

When the unit is off [at 20 oC (68 oF)]

 

*2

At room temperature using headphones [at 20 oC (68 oF)]

Play time indicated above may differ depending on the use.

To change the LCD brightness (> 13, “Adjusting the pictures on the LCD screen”).

Checking the remaining battery charge

Not displayed when the AC adaptor is in use.

Press [SUB MENU] while the power is "On"

Remaining charge is displayed for a few seconds at the bottom right of the screen.

Fully charged

Recharge

 

(flashing)

Charge the battery pack when the display starts to flash.

Appears automatically when there is only a few minutes of charge remaining.

1 Connect the car DC adaptor to the unit.

2 Connect the car DC adaptor to the cigarette lighter socket.

Replacing the fuse

Replace only with the specified 125 V/250 V, 3.15 A fuse. Use of any other type can cause fire.

125 V/250 V, 3.15 A type

1Open the socket.

2 Replace the fuse.

3 Close the socket.

Cautions

To avoid draining your car battery

jDisconnect the Car DC Adaptor from the cigarette lighter after use. The Car DC Adaptor continues to consume some power even if it is not being used, and if a battery pack is attached to this unit, it will start recharging which uses more power.

jDo not use the Car DC Adaptor for long periods when the engine is not running.

Leave some slack in the cord.

No responsibility will be taken for damage that occurs due to faulty installation.

VQT2H71

11

Image 11
Contents If you have any questions contact PANA7262 Warranty can be found onRegion management information Bottom of product Important Safety InstructionsFor USA-California Only BatteriesAC adaptor Listening cautionAccessories Table of contentsDisc and card handling Firmware updatesMaintenance Unit and media careRR/rRW/rR DL Media Disc and card informationCommercially sold discs User recorded mediaDiscs that cannot be played in this unit SD cardsUnit Charge indicatorOverview Range of use Remote controlInsert the button-type battery included Remote control transmitterUsing the battery pack Adjusting the LCD screen anglePreparing the Power Supply Using the unit connected to the AC adaptorPress SUB Menu while the power is On Connecting the included Car DC AdaptorDetaching the battery pack Checking the remaining battery chargeTurn the unit off automatically Easy SettingTurning on/off the unit Showing Function MenuSD card Adjusting the pictures on the LCD screenLoading the disc or SD card DiscBasic play Playing video contents DVD-VR Avchd To switch from other menus to Avchd or MPEG2 menuChapter playback To return to the previous screenOther operations during play DVD-VR MPEG2 Screen AspectStatus messages Changing audioUseful functions during still picture play Playing still picturesTo select the still pictures in another folder Press 3, 4, 2, 1 to select Set and press OK RotateZoom out Press 3, 4 to select Zoom out and press OKPress 3, 4 to select the track and press OK To switch from other menus to MP3 menuPlaying music Insert a discFormatting SD cards/Deleting data Signal TypeWhat is BONUSVIEW? Enjoying Bonusview in BD-VideoOn-screen menu operations Changing settings with the on-screen menuVideo PlayAudio Press 3, 4, 2, 1 to select the option and press OK Changing the unit’s settingsSetup menu operations Summary of settingsOthers TV Aspect SettingDisplay ≥ Discs must conform to UDF File formatExtension Files must have the extension .mp3 or MP3 SD card Structure of folders that can be played in this unitDVD-R/DVD-R DL/CD-R/CD-RW BD-RE/DVD-RAMScreen messages Indicators and screen messagesIndicators Visit our website to find a service center Troubleshooting guidePower To reset this unitOperation Other difficulties with playback SoundCard Specifications Glossary Contact Information cdrequest@am-linux.jp Language code listLicenses Model Number Limited WarrantyProduct or Part Name Parts Labor As of NovemberIndex