Panasonic DMP-B100 Firmware updates, Unit and media care, Disc and card handling, Maintenance

Page 5

Firmware updates

Occasionally, Panasonic may release firmware updates for this unit that may add or improve the way a feature operates. These updates are available free of charge.

You can download the latest firmware version from the website “http://panasonic.jp/support/global/cs/” (This site is in English only.).

After you burn the latest firmware to a CD-R disc, play the disc in the unit and update the firmware.

Only when connecting the AC adaptor.

During the firmware update “DO NOT TURN OFF OR UNPLUG THE UNIT OR OPEN THE DISC LID.”

The [Í] and [CHARGE] indicators light while updating the firmware and the indicators turn off when updating the firmware is finished. (> 8)

To check the version of the firmware on this unit, refer to “System Information” (> 25)

Unit and media care

Disc and card handling

Clean discs

DO

DO NOT

started

 

Wipe with a damp cloth and then wipe dry.

Getting

 

Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or

 

fingerprints on the disc.

 

≥ Do not attach labels or stickers to discs (This may cause disc

 

warping, rendering it unusable).

 

≥ Do not write on the label side with a ball-point pen or other

 

writing instrument.

 

≥ Do not use record cleaning sprays, benzine, thinner, static

 

electricity prevention liquids or any other solvent.

 

≥ Do not use scratch-proof protectors or covers.

 

≥ Clean any dust, water, or foreign matter from the terminals on

Playback

jDiscs with exposed adhesive from removed stickers or

the rear side of the card.

 

≥ Do not use the following discs:

 

labels (rented discs etc).

 

jDiscs that are badly warped or cracked.

 

jIrregularly shaped discs, such as heart shapes.

 

Maintenance

To clean this unit, wipe with a soft, dry cloth.

≥ Use eyeglass cleaner to remove stubborn dirt from the LCD.

 

≥ Do not use a microfiber dust cloth on the LCD screen. Follow

 

the caution when wiping the outer casing.

 

≥ Never use alcohol, paint thinner or benzine to clean this unit.

Settings

≥ Wiping the LCD and around the LCD with a hard cloth or

 

rubbing them strongly may scratch the surfaces.

 

Maintenance of the lens

Remove dust carefully with an air blower for camera lenses (optional).

Recommended product:

Lens cleaner kit (SZZP1038C) (Available from Panasonic dealers.)

You cannot use a CD type lens cleaner.

Be careful not to touch the lens with your fingers.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If

Reference

you discard this unit either by disposal or transfer, then follow

 

the procedure to return all the settings to the factory presets to

 

delete the user settings. (> 29, “To return all settings to the

 

factory preset”)

 

The operation history may be recorded in the memory of this unit.

VQT2H71

5

Image 5
Contents If you have any questions contact PANA7262 Warranty can be found onRegion management information Bottom of product Important Safety InstructionsAC adaptor BatteriesListening caution For USA-California OnlyAccessories Table of contentsMaintenance Firmware updatesUnit and media care Disc and card handlingCommercially sold discs Media Disc and card informationUser recorded media RR/rRW/rR DLDiscs that cannot be played in this unit SD cardsUnit Charge indicatorOverview Insert the button-type battery included Remote controlRemote control transmitter Range of usePreparing the Power Supply Adjusting the LCD screen angleUsing the unit connected to the AC adaptor Using the battery packDetaching the battery pack Connecting the included Car DC AdaptorChecking the remaining battery charge Press SUB Menu while the power is OnTurning on/off the unit Easy SettingShowing Function Menu Turn the unit off automaticallyLoading the disc or SD card Adjusting the pictures on the LCD screenDisc SD cardBasic play Playing video contents Chapter playback To switch from other menus to Avchd or MPEG2 menuTo return to the previous screen DVD-VR AvchdOther operations during play Status messages Screen AspectChanging audio DVD-VR MPEG2Useful functions during still picture play Playing still picturesZoom out Press 3, 4, 2, 1 to select Set and press OK RotatePress 3, 4 to select Zoom out and press OK To select the still pictures in another folderPlaying music To switch from other menus to MP3 menuInsert a disc Press 3, 4 to select the track and press OKWhat is BONUSVIEW? Signal TypeEnjoying Bonusview in BD-Video Formatting SD cards/Deleting dataOn-screen menu operations Changing settings with the on-screen menuVideo PlayAudio Setup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKOthers TV Aspect SettingDisplay ≥ Discs must conform to UDF File formatExtension Files must have the extension .mp3 or MP3 DVD-R/DVD-R DL/CD-R/CD-RW Structure of folders that can be played in this unitBD-RE/DVD-RAM SD cardScreen messages Indicators and screen messagesIndicators Power Troubleshooting guideTo reset this unit Visit our website to find a service centerOperation Other difficulties with playback SoundCard Specifications Glossary Contact Information cdrequest@am-linux.jp Language code listLicenses Product or Part Name Parts Labor Limited WarrantyAs of November Model NumberIndex