Network Easy Setting
For Middle East and Asia
After completing “Easy Setting”, you can continuously perform “Network Easy Setting”.
Follow the
Network Easy Setting (Connection Check)
LAN setup and testing of home network and Internet connections are required for Internet functions
Broadband Internet connection is necessary for
Is a LAN cable already connected ?
Please refer to the operating instructions about network connection.
Press [OK] to proceed.
OK
RETURN
≥When you experience problems (> 13)
Firmware updating
Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following screen is displayed.
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/
YesNo
OK
RETURN
DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.
The firmware has been updated.
Current Installed Version: x.xx
OK
RETURN
≥You can perform update anytime by selecting “Firmware Update” in the Setup menu. (> 31)
≥If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a
(This site is in English only.)
To show the firmware version on this unit. (> 31, “System Information”)
≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.
≥If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. (> 31)
14
STEP 6 : Reprogramming the remote control
For other Panasonic products
If you have more than one Panasonic player/recorder and the remote control operates both products at once, you will need to change the remote control code on one product to prevent this occurrence. After changing the remote control code on this product, you will need to change the code of the remote control. (> 31, “Remote Control”)
For TV or amplifier/receiver
You can operate the TV or amplifier/receiver using the unit’s remote control.
1 For televisions
Input the
For amplifiers/receivers
Input the
e.g., 01: [0] B [1]
2 Test by turning on the television or adjusting the volume of the amplifier/ receiver.
≥If your television or amplifier/receiver brand has more than one code listed, select the one that allows correct operation.
VQT2H83