Panasonic DMP-BD85 Recommended audio output setting, For details of the each item, refer to

Recommended audio output setting

The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.

Press [FUNCTION MENU] > select “To Others” > “[OK]”> select “Setup” > “[OK]”> “Sound” > Set each item

For details of the each item, refer to page 29.

			Example of connected equipment
			Receiver with	Receiver without	Receiver via	Receiver
		TV via HDMI*1	HD audio*2	HD audio*2	COAXIAL or	via analogue
Setup menu			decoder via	decoder via
					OPTICAL	output*3
			HDMI	HDMI
	“Dolby D/Dolby
	D +/Dolby	“PCM”	“Bitstream”	“PCM”	“PCM”	No effect
“Digital	TrueHD”
Audio	“DTS/DTS-HD”	“PCM”	“Bitstream”	“PCM”	“PCM”	No effect
Output”	“BD-Video
	Secondary	“Off”	“Off”	“Off”	“Off”	“Off”
	Audio”
“PCM Down Conversion”		No effect	No effect	No effect	“Off”*4	No effect
“Downmix”		“Stereo”	No effect	No effect	“Stereo”*5	No effect
“High Clarity Sound”		“Enable”	“Disable”*6	“Disable”*6	“Disable”*6	“Disable”*6

≥Because underlined items are the factory presets, it is not necessary to change these settings.

*1 If connected to TV via except HDMI, these settings have no effect.

*2 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio

*3 Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [FUNCTION MENU] > “To Others” > “Setup”) *4 If the connected equipment that does not support 96 kHz, set to “On”.

*5 If the connected equipment that supports the virtual surround function, set to “Surround encoded”.

*6 When connected to TV via HDMI terminal for outputting image, set to “Enable”.

36

VQT2H83