Settings
ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:
1. | Select Network Status. The product |
| searches for a network, and then displays |
| the connection failed message. |
2. | On the bottom of the screen, select IP |
| Settings, and then press the v button. |
| The IP Settings screen appears. |
3. | Select the IP Setting field, and then press |
| the v button. |
4. | Select Enter manually in the IP Setting |
| field, and then press the v button. |
5. | Select a value to enter (IP Address, for |
| example), and then press the v button. |
| Use the number keypad on your remote |
| control to enter the numbers for the value. |
| You can also enter numbers using the |
| ▲▼ buttons. Use the ◀▶ buttons on the |
| remote control to move from entry field |
| to entry field within a value. When done |
| with one value, press the v button. |
6. | Press the ▲ or ▼ button to move to |
Wireless Network
You can set up a wireless network connection in four ways:
-- WPS(PIN)
When you configure the wireless network connection, any wireless network devices currently connected through the product or, if applicable, the product's current wired connection, will be disconnected.
ĞĞWireless - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button. The product searches for and then displays a list of the available networks.
another value, and then enter the |
numbers for that value following the |
instructions in Step 5. |
7. Repeat Steps 5 and 6 until you have filled |
in all values. |
NOTE
\\ You can get the Network values from your Internet provider.
Network Settings
Select your network type.
Network type | Wireless |
Wireless network
iptime23
iptime
solugen_edu#2
Refresh WPS(PBC)
You can connect your Blu- ray player to the internet. Please select which wireless network to use.
8.When finished entering all the values,
select OK, and then press the v button. The product verifies the network connection and then connects to the network.
5.Select the desired network, and then press the v button.
6.On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.
22 English