NOTE
\\ To view the password as you enter it, use the arrow buttons to select Show Password on the right side, and then press v button.
7.When finished, select Done and then press the v button. The product verifies the network connection and then connects to the network.
8.When verification is complete, select OK, and then press the v button.
NOTE
\\ You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.
ĞĞWireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
1.Follow the directions in Wireless - Automatic through Step 5.
2.The product searches for a network, and then displays the connection failed message.
3.On the bottom of the screen, select IP Settings, and then press the v button. The IP Settings screen appears.
4.Select the IP Setting field, and then press the v button.
5.Select Enter manually in the IP Setting field, and then press the v button.
6.Select a value to enter (IP Address, for example), and then press v button. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the v button.
7.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 6.
8.Repeat Steps 6 and 7 until you have filled in all values.
NOTE
\\ You can get the Network values from your Internet provider.
9.When finished, select OK, and then press the v button. The Security Screen appears.
10.On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◀▶ buttons, and then pressing the v button.
11.When finished, select Done at the right of the screen, and then press the v button. The product verifies the network connection and then connects to the network.
12.After the product verifies the network, select OK, and then press the v button.
ĞĞWPS(PBC)
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button.
5.Press the ▲ button on your remote, and then press the ▶ button to select the WPS(PBC).
6.Press the v button on your remote. The "Press the PBC button on your wireless router within the next two minutes." message appears.
7.Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network.
The Network Status screen appears. The product connects to the network after the network connection is verified.
04 Settings
23 English