Connections
Connecting to a TV and External Devices
R
W
Red
White Method 1
AUX IN | FM ANT |
|
|
L |
|
| LAN |
|
|
| |
R | OPTICAL |
|
|
| DIGITAL | HDMI OUT | HDMI IN |
| AUDIO IN |
Method 2 |
|
| Method 3 |
|
| ||
|
| ||
|
|
|
|
External Devices | AUDIO OUT | OPTICAL OUT | HDMI OUT | HDMI IN |
|
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable connected. See page 17 in this manual and the section on ARC in your TV's user's manual for details.
Connecting to External Devices
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the external analog component. Select the AUX mode.
~~ Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers
Method 3 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. Select the HDMI mode.
✎✎ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. ✎✎ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. ✎✎ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
Selecting an External Device to Use
To select an external device after you have connected it, press the SOURCE button. Each time you press the button, the mode changes in this order : BD/DVD ; D. IN ; AUX ; HDMI ; FM ; BT