Settings
✎✎ You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.
ĞĞWireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 20:
1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.
2.Scroll through the list, select the desired network or Add Network, and then press the OK button.
3.If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4.Enter your wireless network or wireless router's name.
~~ Enter letters by selecting a letter with the
,.
buttons, and then pressing the OK button.
~~ To display capital letters (or redisplay lower case letters if capital letters are displayed),
select 
, and then press the OK button.
~~ To display symbols and punctuation, select 123#&, and then press the OK button. To redisplay letters, select 123#&, and then press the OK button.
When finished, select Done, and then press the OK button.
5.On the Security type screen that appears, use the ,. buttons to select the network's Security type, and then press the OK button. On the next screen, enter your network's security code or pass phrase.
~~ Enter letters by selecting a letter with the
,.
buttons, and then pressing the OK button.
When finished, select Done, and then press the OK button. The product searches for the network.
6.The Network connection fail screen appears.
Use 
buttons to select IP Settings, and then press the OK button.
7.Select the IP Setting field, and then set it to Enter manually.
8.Select a network parameter to enter (IP Address, for example), and then press OK button. Use the ,. buttons on the remote control to enter the numbers for the parameter. Or use the Num keypad to enter a parameter number. Press and hold the 123 button until the Num pad appears on the screen. When the Num pad appears, select a
number using the ,.
button and then
press the OK button. Use the 
buttons on the remote control to move from entry field to entry field within a parameter. When done with one value, press the OK button.
9.Press the , or . button to move to another parameter, and then enter the numbers for that parameter following the instructions in Step 8.
10.Repeat Steps 8 and 9 until you have filled in all parameters.
✎✎ You can get the Network parameter values from your Internet provider.
11.When finished, select OK, and then press the OK button. The Security screen appears.
12.On the Security screen, enter your network's security code or pass phrase. Enter letters by
selecting a letter with the ,.
buttons, and then pressing the OK button.
13.When finished, select Done at the right of the screen, and then press the OK button. The product verifies the network connection and then connects to the network.
14.After the home theater verifies the network, select OK, and then press the OK button.
✎✎ You can also begin the Manual Network setup
by going to Settings > Network > Network Status.
ĞĞWPS(PBC)
One of the easiest ways to set up the wireless network connection is using the WPS(PBC) function. If your wireless router has a WPS(PBC) button, follow these steps:
After following Steps 1 to 3 in "Configuring Your Network Connection" on page 20:
1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.