Toshiba TECRA A2 manual Wireless Ieee 802.11 Channels Sets Revision a, 102457*1, 122467*2 132472*2

Wireless LAN

102457*1

112462

122467*2

132472*2

*1 Factory-set default channels

*2 Refer to the sheet Approved Countries/Regions for use for the countries/ regions that in which these channels can be used.

When installing Wireless LAN cards, the channel configuration is managed as follows:

■For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

■For Wireless LAN cards installed in wireless clients that operating in a peer-to-peer mode, the card will use the default channel 10.

■In a Wireless LAN Access Point, the Wireless LAN card will use the factory-set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device.

Wireless IEEE 802.11 Channels Sets (Revision A)

Frequency Range Channel 5150-5850 MHz		Note
ID
36	5180
40	5200
44	5220
48	5240
52	5260
56	5280
60	5300
64	5320
149	5745*3	US only *4

User’s Manual G-3