Toshiba TECRA A2 manual Loading discs, Pressing the DVD-ROM eject button

Operating Basics

Loading discs

To load CD/DVDs, follow the steps below and refer to figures 4-3 to 4-7.

1.a. When the power is on, press the DVD-ROM eject button to open the drawer slightly.

Eject button

Figure 4-3 Pressing the DVD-ROM eject button

b.Pressing the eject button will not open the drawer when the DVD- ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.

Diameter 1.0mm

Figure 4-4 Manual release with the eject hole

2. Grasp the drawer gently and pull until it is fully opened.

Figure 4-5 Pulling the drawer open

4-4 User’s Manual