Toshiba TECRA A2 manual Pointing device, Touch Pad

Troubleshooting

Pointing device

If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation.

Touch Pad

Problem	Procedure
On-screen pointer	The system might be busy. If the pointer is
does not respond to	shaped as an hourglass, wait for it to standby its
Pad operation	normal shape and try again to move it.
Double-tapping does	Try changing the double-click speed setting in
not work	the mouse control utility.
	1.	Open the Control Panel, select the Mouse
		icon and press Enter.
	2.	Click the Buttons tab.
	3.	Set the double-click speed as instructed and
		click OK.
	If problems persist, contact your dealer.
The mouse pointer	Try changing the speed setting in the mouse
moves too fast or too	control utility.
slow	1.	Open the Control Panel, select the Mouse
		icon and press Enter.
	2.	Click the Pointer Options tab.
	3.	Set the speed as instructed and click OK.
When the reaction of	Adjust the touch Sensitivity.
Touch pad is sensitive	1.	Open the Control Panel.
or blunt	2.	Click the Printers icon and then the Other
		Hardware icon.
	3.	Click the Mouse icon.
	4.	Click the Device Setting tab.
	5.	Click the Setting button.
	6.	The Properties for Synaptics Touchpad on
		PS/2 port screen appears. Double-click
		Sensitivity in the Select an item section on
		the left side of the screen.
	7.	PalmCheck and Touch Sensitivity are
		displayed. Click Touch Sensitivity.
	8.	Move the slide bar for Touch Sensitivity to
		make an adjustment. Click the OK button.
	9.	Click the OK button on the Device Setting
		tab.

9-16 User’s Manual