Toshiba TECRA A2 manual Optional Devices

Optional Devices

■Use only memory modules approved by TOSHIBA.

■Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.

a.The computer is turned on.

b.The computer was shut down using the Standby mode or Hibernation mode.

c.Wake-up on LAN is enabled.

■Some memory modules can be physically installed but are not compatible with the computer. In this case the computer will issue a warning. A beep will sound when you turn on the power.

■The beep sound rings when a wrong memory is inserted. Refer to Memory expansion section in Chapter 9 for details.

■Expansion memory is a precision electronic component that may be fatally damaged by static electricity. Since human body has slight static electricity, be sure to discharge static electricity from your body before installing an expansion memory module. To discharge your body's static electricity, simply touch any metal close to you with bare hands.

Use a point size 0 Phillips screwdriver to remove and fasten the screws. Use of an incorrect screwdriver can damage the screw heads.

8-4 User’s Manual