Toshiba TECRA A2 manual Opening the display, Turning on the power

Getting Started

Opening the display

The display panel can be rotated in a wide range of angles for optimal viewing.

1.Slide the display latch on the front of the computer to the right.

2.While holding down the palm rest with one hand so that the main body is not raised, lift the panel slowly. Adjust the angle of the panel to provide optimal clarity.

Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

Display latch

Figure 3-5 Opening the display

Turning on the power

This section describes how to turn on the power.

After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section Windows XP setup.

1.If the external floppy disk drive is connected, make sure it is empty. If a floppy disk is in the drive, press the eject button and remove the floppy disk.

2.Open the display.

User’s Manual 3-7