Toshiba TECRA A2 manual Parallel/Printer, Parallel Port Mode

HW Setup and Passwords

To delete a user password:

1.Select Not Registered to display the following prompt:

S Enter Password:

2.Enter the currently registered password. The character string you enter is displayed as a string of asterisks.

S Enter Password: ****

If you click the OK button before entering the password, Registered will appear on the display.

3.Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to:

S The password was deleted

If they do not match, the following message appears. You must repeat step 1.

S Incorrect Password

If you enter the password incorrectly three times, the screen will display:

Sorry, access denied!!! Powering off your machine then powering it back on again are required to regain access.

You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.

Parallel/Printer

Some models are equipped with Parallel/Printer tab. This tab lets you set the Parallel Port Mode. Use the Windows Device Manager to make settings for the Parallel port.

Parallel Port Mode

The options in this tab are ECP and Standard Bi-directional.

ECP	Sets the port type to Extended Capabilities Port
	(ECP). For most printers, the port should be set
	to ECP. (Default)
Standard	This setting should be used with some other
Bi-directional	parallel devices.

User’s Manual 7-3