Toshiba TECRA A2 manual Advanced Port Replicator IIl, Set the Parallel Port Mode and press OK

Optional Devices

4.Insert the other end of the cable into the printer’s parallel connector.

5.Fasten the connector to the printer with the clips on the parallel port.

6.Turn on the printer.

7.Turn on the computer.

8.Start the HW Setup program. Refer to Chapter 7, HW Setup and Passwords.

9.Select the Parallel/Printer tab from the TOSHIBA HW Setup window.

10.Set the Parallel Port Mode and press OK.

11.Choose Reboot for the change to take effect.

12.Select the printer in Windows Add Print Wizard. To access the Add Print Wizard utility, click Start, point to Settings, click Printers and double click the Add Printer icon.

Advanced Port Replicator IIl

In addition to the ports available on the computer, the Advanced Port Replicator lll provides serial port and separate ports for PS/2 mouse and PS/2 keyboard. The Port Replicator connects directly to the docking interface on the bottom of the computer. The AC adaptor connects the Port Replicator to a power source.

The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.

■You must connect the AC adaptor before you connect to a Advanced Port Replicator III.

■When a Port Replicator III is connected to the computer, you can not use the following computer’s ports: Modem jack, LAN jack, DC IN 15V port, USB port, Parallel port, External monitor port.

User’s Manual 8-9