Toshiba TECRA A2 manual Connecting the AC adaptor, Securing the battery pack

Getting Started

4.Secure the battery pack releace latch(1). Check the battery lock was changed to the lock position. (to the direction of the right)

Battery release	Battery pack
latch(1)

Figure 3-2 Securing the battery pack

Refer to Removing the battery pack section in Chapter 6, Power and Power-Up Modes for removing the battery pack.

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.

The AC adaptor can be connected to any power source supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.

Use only the AC adaptor supplied as an accessory. Other AC adaptors have different voltage and terminal polarities and use of them may produce heat and smoke or even result in fire or rupture.

User’s Manual 3-5