Toshiba TECRA A2 manual HDDs are searched for a boot command, Card. Default

HW Setup and Passwords

HDD Priority Options

If more than one HDD is installed in the computer, this option lets you set the priority for HDD detection. If the first detected HDD has a boot command, the system will boot from the HDD.

Built-in HDD −>		HDDs are searched for a boot command in the
PC Card(Default)		following order: the built-in HDD, and the PC
		card. (Default)
PC	Card −> Built-	HDDs are searched for a boot command in the
in	HDD	following order: the built-in HDD and the PC card.

If a boot command is not found on the first detected HDD, the system will not boot from the other HDD. It will search the next device in the boot priority for a boot command.

Network Boot Protocol

This feature sets the protocol to remotely boot from the network. [PXE] Sets PXE as the protocol. (Default)

[RPL] Sets RPL as the protocol.

The Wake-up on LAN function consumes power even when the system is off. Leave the universal AC adaptor connected while using this feature.

Keyboard

External Keyboard Fn key

Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer’s internal keyboard. Setting an Fn key equivalent will let you use Hot keys by pressing the set combination instead of the Fn key. (PS/2 keyboard only)

Disabled	No Fn key equivalent (Default)
Fn Equivalent	Left Ctrl	+	Left Alt
	Right Ctrl	+	Right Alt
	Left Alt	+	Left Shift
	Right Alt	+	Right Shift
	Left Alt	+	Caps Lock

If you select Left Ctrl + Left Alt or Right Ctrl + Right Alt for this option, you cannot use the selected keys to reboot the computer in combination with the Del key. For example, if you select Left Ctrl + Left Alt, you must use Right Ctrl, Right Alt and Del to reboot the computer. Left Ctrl, Left Alt and Del cannot be used.

User’s Manual 7-7