Toshiba TECRA A2 manual Heat dispersal, Standby

			Introduction
Heat dispersal	To protect from overheating, the CPU has an
	internal temperature sensor. If the computer’s
	internal temperature rises to a certain level, the
	cooling fan is turned on or the processing speed
	is lowered. Use the Fan item of the Basic Setup
	tab in TOSHIBA Power Saver.
	■	Maximum	Turns on fan first, then if
		Performance	necessary lowers CPU
			processing speed.
	■	Performance	Uses a combination of
			fan and lowering the
			CPU processing speed.
	■	Battery optimized	Lowers the CPU
			processing speed first,
			then if necessary turns
			on the fan.
Hibernation	This feature lets you turn off the power without
	exiting from your software. The contents of main
	memory are saved to the hard disk, when you
	turn on the power again, you can continue
	working right where you left off. Refer to the
	Turning off the power section in Chapter 3,
	Getting Started, for details.
Standby	If you have to interrupt your work, you can turn off
	the power without exiting from your software.
	Data is maintained in the computer’s main

memory. When you turn on the power again, you can continue working right where you left off.

User’s Manual 1-11