Toshiba TECRA A2 manual Use Hardware Decode Acceleration

Display Controller and Modes

Figure B-4 WinDVD 5.0 Sub-panel

■The following [Set up] screen is displayed, then remove the check of

[Use Hardware Decode Acceleration]

(The check of [Use Hardware Color Acceleration]is removed automatically).

Figure B-5 Setup

■ Click [OK] button(The [Set up] tab closes automatically).

4.The DVD video overlay is not displayed when the display mode of CRT display is set to high resolution and hifh refresh rate mode at LCD/CRT simultinous or multi-monitor.

Please decrease the resolution and refresh rate of CRT display.

5.When the display mode is TV or simultaneous LCD (internal liquid crystal display)/TV and the system goes into Standby or Hibernation mode, you can switch to the LCD (internal liquid crystal display) display mode by pressing [Fn] + [F5]. Under this environment, however, you may not return to the TV or simultaneous LCD (internal liquid crystal display)/TV display mode.

In these cases, perform the following steps:

Press [Ctrl] + [Alt] + [F12] to select [Intel(R) 82852/82855 GM/GME Graphics Controller Prope...]. Then click the icon indicating a display device (display mode) you want to use in the left pane of the [Devices] tab.

B-12 User’s Manual