Toshiba TECRA A2 HDD automatic, System automatic, Standby/Hibernation, Keypad overlay, Supply

Introduction

HDD automatic	This feature automatically cuts off power to the
power off	hard disk drive when it is not accessed for a time
	specified. Power is restored when the hard disk is
	accessed. You can specify the time in the HDD
	power off item of the Basic Setup tab in TOSHIBA
	Power Saver.
System automatic	This feature automatically shuts down the system
Standby/Hibernation	in standby mode or Hibernation mode when there
	is no input or hardware access for a time
	specified. You can specify the time and select
	either System Standby or System hibernation in
	the System standby and System item of the Basic
	Setup tab in TOSHIBA Power Saver.
Keypad overlay	A ten-key pad is integrated into the keyboard.
	Refer to the Keypad overlay section in Chapter 5,
	The Keyboard, for instructions on using the
	keypad overlay.
Power on password	Two levels of password security, supervisor and
	user, are available to prevent unauthorized
	access to your computer.
Instant security	A hot key function blanks the screen and disables
	the computer providing data security.
Intelligent power	A microprocessor in the computer’s intelligent
supply	power supply detects the battery’s charge and
	calculates the remaining battery capacity. It also
	protects electronic components from abnormal
	conditions, such as voltage overload from an AC
	adaptor. You can monitor remaining battery
	capacity. Use the Battery remaining item in
	TOSHIBA Power Saver.
Battery save mode	This feature lets you save battery power. You can
	specify the Power Save Mode in the Profile item
	in TOSHIBA Power Saver.
Panel power on/off	This feature turns power to the computer off
	when the display panel is closed and turns it back
	on when the panel is opened. You can specify the
	setting in the When I close the lid item of the
	Setup Action tab in TOSHIBA Power Saver.
Low battery	When battery power is exhausted to the point that
automatic	computer operation cannot be continued, the
hibernation	system automatically enters Hibernation and
	shuts down. You can specify the setting in the
	Setup Action tab in TOSHIBA Power Saver.

1-10 User’s Manual