Toshiba TECRA A2 manual Device Configuration

HW Setup and Passwords

Device Config

Device Configuration

This option lets you set the device configuration.

All Devices	BIOS sets all devices.
Setup by OS	Operating system sets devices that it can control.
	(Default)

Display

This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.

Power On Display

Lets you use the display to be used when the computer is booted. (This setting is only available on Standard VGA mode and not available on Windows Desktop)

Auto-SelectedSelects an external monitor if one is connected. Otherwise, it selects the internal LCD. (Default)

LCD + Analog RGB Selects both the internal LCD and external monitor for simultaneous display.

If the connected external monitor does not support the SVGA mode, selecting the LCD + Analog RGB mode will not display the screen on that monitor.

At Windows start-up, the screen is displayed on the external monitor if it was connected at the time of the previous power-off, and is found at the start-up. Otherwise, the screen is displayed on the internal LCD.

CPU

This function lets you set the CPU operating mode.

Dynamic CPU Frequency Mode

This option lets you choose from the following settings:

Dynamically	CPU power consumption and clock speed
Switchable	automatic switching function is enabled. When
	the computer is in use, CPU operation is
	automatically switched when necessary.
	(Default)

7-4 User’s Manual