Toshiba TECRA A2 manual Installing the battery pack, Securing the battery pack

Power and Power-Up Modes

Installing the battery pack

To install a battery, follow the steps below.

■The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements.

■Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

1.Turn the computer’s power off.

2.Disconnect all cables connected to the computer.

3.Insert the battery pack.

4.Secure the battery release latch (1). Check the battery release latch (1) was changed to the lock position. (to the direction of the right)

Battery release	Battery pack
latch (1)

Figure 6-4 Securing the battery pack

6-14 User’s Manual