Toshiba TECRA A2 Using the USB floppy disk drive, Connecting 3 1/2 floppy disk drive, Scroll

Operating Basics

Click: Tap the Touch Pad once

Double-click:Tap the Touch Pad twice

Drag and drop:

1.Hold down the left control button and move the cursor to drag the item you want to move.

2.Lift your finger to drop the item where you want it.

Scroll:

Vertical: Move your finger up or down the right edge of the Touch Pad.

Horizontal: Move your finger left or right along the bottom edge of the Touch Pad.

Using the USB floppy disk drive

A 3 1/2" floppy disk drive connects to the computer’s USB port. It accommodates 1.44-megabyte or 720-kilobyte floppy disks. Refer to Chapter 2, The Grand Tour, for more information.

Connecting 3 1/2" floppy disk drive

To connect the drive, plug the floppy disk drive connector into a USB port. Refer to Figure 4-2.

Make sure the connector is right side up and properly aligned with the socket. Do not try to force the connection; doing so can damage the connecting pins.

Figure 4-2 Connecting the USB floppy disk drive

If you connect the floppy disk drive after turning on the computer, it will take about 10 seconds for the computer to recognize the drive. Do not disconnect and reconnect before 10 seconds has elapsed.

4-2 User’s Manual