Connecting up
Chapter 2
Connecting up
Rear panel
1 | 2 | 3 | 4 | 5 | 6 |
| 7 |
| CONTROL | IN |
|
|
|
|
|
|
|
|
|
|
|
| |
AC IN | IR |
|
|
|
|
|
|
|
|
|
| Y |
|
| |
|
| IN |
|
|
|
| |
|
|
| VIDEO OUT |
|
|
| |
|
|
|
|
|
|
| |
| SETTING 2 |
|
|
| PB | DIGITAL AUDIO OUT | |
| HDMI OUT | LAN(10/100) |
|
|
| ||
|
|
|
|
|
| ||
| SETTING 1 |
|
|
|
|
|
|
| IR RECEIVER |
|
| S | PR |
|
|
|
|
|
|
| COMPONENT | COAXIAL | OPTICAL |
|
|
|
|
| VIDEO OUT |
|
|
02
8 9
AUDIO OUT | AUDIO OUT |
(5.1ch) | (2ch) |
CENTER SURROUND | FRONT |
L | L |
| R |
R |
|
SUB WOOFER |
|
10 11
1 AC IN
Connect the supplied power cord here, then plug into a power outlet.
2 CONTROL IN
Use to control this player from the remote sensor of another Pioneer component with a CONTROL OUT terminal and bearing the 
mark. Connect the CONTROL OUT of the other component to the CONTROL IN of this player using a
3 HDMI OUT
HDMI output providing a high quality interface for digital audio and video (page 13).
4 LAN (10/100)
Ethernet port for
5 VIDEO OUT and S-VIDEO OUT
Video output (composite) that you can connect to your TV or AV receiver using the supplied video cable (page 12).
6 COMPONENT VIDEO OUT
High quality video output for connection to a TV, monitor or AV receiver that has component video inputs.
Connect using a commercially available
7 DIGITAL AUDIO OUT – COAXIAL/OPTICAL
Digital audio outputs for connection to a PCM, Dolby Digital, and/or
8 AUDIO OUT (5.1ch)
9 AUDIO OUT (2ch)
Stereo analog audio outputs for connection to your TV, AV receiver or stereo system (page 12).
10 IR IN
Jack for an external IR (infrared) remote control receiver (page 16).
11 IR RECEIVER switch
Switch to the setting compatible with your external IR remote control receiver (page 16).
Tip
•When connecting this player to your TV, AV receiver or other equipment, make sure that all components are switched off and unplugged.
•You may find it useful to have the manuals supplied with your other components handy when connecting this player.
11
En