04Getting Started
Chapter 4
Getting Started
Switching on and setting up
When you switch the player on for the first time the Setup Navigator screen appears. We recommend using this to make a few basic player settings.
If you don’t want to use the Setup Navigator, press to select Cancel, then press ENTER to exit the Setup Navigator.
5Use the / buttons to select the output video resolution then press ENTER.
STANDBY/ON
Setup Navigator
Output Video Resolution
Auto
480i
480p
720p
1080i
1080p
Source Direct
If you connected this player to your TV using the HDMI connector, select from Auto, 480i (interlaced), 480p (progressive), 720p, 1080i, 1080p, or Source Direct, then skip to step 7 (the aspect ratio will automatically be set to 16:9 (Widescreen)). Generally, the Auto setting is recommended.
ENTER
1Switch on your TV and set the video input to this player.
2Press the STANDBY/ON button on the remote control or the front panel to switch on.
•It can take up to one minute for the unit to turn on.
•When you switch on for the first time, your TV should display the Setup Navigator screen. (If the Setup Navigator doesn’t appear, you can also access it from the Initial Setup menu; see page 43).
•When you have this unit connected to a plasma television that is compatible with HDMI Control, language settings are imported from the plasma television’s OSD settings before Setup Navigator begins.
3Use the / buttons to choose a language, then press
ENTER.
Setup Navigator
Language
English
f r ançais Es p añol
4 Press ENTER to start setting up using the Setup Navigator.
Setup Navigator
Before using, make some simple settings for the BD player.
Sta r t
Cancel
Please use the Initial Setup if you want to make more detailed settings.
20
Setup Navigator
Output Video Resolution
480i
480p
720p
1080i
Don't Know
If you’re using an
If you’re using a component video connection, match the output setting with the capabilities of your TV. Select from: 480i, 480p, 720p, 1080i or Don’t Know. If you select 720p or 1080i, skip the next step since the aspect ratio will automatically be set to 16:9 (Widescreen).
6Use the / buttons to select the aspect ratio of your TV then press ENTER.
Setup Navigator
TV Aspect Ratio
16:9 (Widescreen)
4:3 (Standard)
If you have a widescreen TV, select 16:9 (Widescreen); if you have a standard size TV, select 4:3 (Standard).
7Select ‘Finish Setup’ to accept the settings and exit the Setup Navigator, or ‘Go Back’ to go through the settings again.
Setup Navigator
Setup is complete!
Enjoy using your BD player!
Finish Setup
Go Back
You can run the Setup Navigator at any time by selecting it from the Options menu — see page 43.
En