Before Starting Playback
Turning the Power On |
| Entering standby |
|
|
|
POWER
Press POWER on the remote control or on the Player to enter standby.
•If you press POWER again immediately after entering standby, the Player may not turn on. If this happens, wait for 10 seconds or more and then turn on the power again.
NOTE
•When the ON/STANDBY indicator is blinking (may take some time), the Player cannot be turned on.
Indicators on the Player
ON/STANDBY indicator
Green on | Power on |
|
|
Red blinks | Preparing for standby |
|
|
Red on | Standby |
|
|
AQUOS PURE MODE indicator
Green on | Output in AQUOS PURE |
| MODE (See page 22.) |
|
|
ON/STANDBY indicator | BD/DVD/CD mode indicator | |
| Blue on | Playing back |
| Blue blinks | Loading a disc |
AQUOS PURE MODE indicator |
BD/DVD/CD mode indicator |
Turning the power on
Press POWER on the remote control or on the Player to turn on the power of the Player.
NOTE
•When you turn on this player for the first time after purchase or when you turn on this player after you perform “System Reset” (see page 41), the language setting screen will be displayed, so please perform the language setting (see step 4 of page 21).
•When you turn on the power, the Menu screen automatically displays for a while.
Press EXIT to exit the Menu screen.
20