Sharp BD-HP52U Manual Update from USB memory device, Enter the 4-digit number using

SETTINGS

Manual Update from USB memory device

This function allows software updates by inserting a USB memory device with the update file into the BD STORAGE/SERVICE terminal on this player.

•When a software update is performed, the software update data must be written onto the USB memory device in advance using a PC.

•The USB memory device must be clear of all files except software update data to allow new software uploading.

To check for the availability of a software update, visit www.sharpusa.com/products/support/. If you have any questions, please call 1-800-BE- SHARP (800-237-4277).

•When software update data is released, copy the data onto a USB memory device after downloading it to a PC.

•For methods such as downloading and copying to a USB memory device, carefully read the description shown on the website before performing the operation.

NOTE

•Only USB memory devices formatted with FAT 32/16 are compatible.

When formatting a USB memory device using a PC, perform the following settings.

Format File System: FAT32

Allocation Unit Size: Default Allocation Size

•Do not extract the firmware update file to any folders other than the root directory on the USB memory device. The firmware update file must be only one file directly in the root directory.

CAUTION

•Do not remove the USB memory device or unplug the AC cord while the software is being updated.

1Insert the USB memory device with the update file into the BD STORAGE/SERVICE terminal on rear of this player.

USB memory device

2Press SETUP to display the Menu screen.

3Press a/b to select “Settings”, then press d or

ENTER.

4Press a/b to select “Software Update Settings”, then press d or ENTER.

5Press a/b to select “Manual Update”, then press d or ENTER.

6Press a/b to select “USB Memory”, then press

ENTER.

• If you have not yet set the password, go to step 8.

7Enter the 4-digit number using 0–9.

Enter 4-digit password

8Press ENTER to start checking data in the USB memory device.

Insert USB memory device containing the software update file.

OK

9During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Checking

48