BD/DVD/CD Playback, Loading a Disc | Sharp BD-HP52U instruction

Sharp BD-HP52U operation manual BD/DVD/CD Playback, Loading a Disc, BD/DVD Video Playback

BD/DVD/CD Playback

This section explains playback of commercially available BD Video and DVD Video discs (like movies), CDs, and recorded DVD-RW/R discs.

Loading a Disc

POWER

OPEN/CLOSE

1Press POWER to turn on the power.

2Press OPEN/CLOSE to open the disc tray.

3Load a disc on the disc tray.

•Insert the disc with the label face up.

•In case of disc recorded on both sides, face down the side to play back.

4Press OPEN/CLOSE to close the disc tray.

BD/DVD Video Playback


BD VIDEO	BD-RE		BD-R

DVD VIDEO		DVD-R		DVD-RW

This player supports DVD upscaling during DVD playback.

•For a description of other playback functions, refer to “Playback Functions” on pages 32–35.

1Load a disc.

•Playback may begin automatically, depending on the disc.

•Playback begins from the first title.

•The menu may be displayed first, depending on the disc. Perform playback operation by following the directions on the screen.

2Press d PLAY if playback does not begin automatically or playback is stopped.

NOTE

• The disc load time may vary depending on the disc.

Regarding playback of BD video discs

•Some of the newly released BD video discs cannot be played back unless you update the player software to the latest version. Therefore, it may be required to update the software of the player.

Refer to pages 46–49 for more information regarding software updates for the player.

To stop playback

Press HSTOP.

Resume playback function

•If you press d PLAY next, playback will resume from the point where the Player was previously stopped. To

playback from the beginning, cancel resume mode by pressing HSTOP, then press d PLAY. (This may not work depending on the type of disc. In this case, open the disc tray or enter standby.)

NOTE