Sharp BD-HP52U Software Update Settings, Auto Update from Network, Update process, Setup

SETTINGS

Software Update Settings		Update process
		1 When this player is turned on, the internet
In this player, the software version can be updated		connection starts automatically.
using either one of the following methods.		•	“Accessing...” blinks on the screen.
• Auto Update from Network
• Manual Update from Network
• Manual Update from USB memory device		•	The current version of this unit software and the latest
			version of the update file on the network are displayed
Auto Update from Network
			when latest version of firmware has been found.
			To update this player software with update file, select
This function allows you to perform the update by			“Yes”, and go to step 2.
accessing an internet connection automatically to		Latest version of firmware has been found.
check if there is a new firmware version every time the		Firmware update is available.
player is turned on.		Proceed with update?
When using this function, it is required to perform the		Current Version :		xxxxxxxxxx
following settings in advance.		Latest Version :		yyyyyyyyyy
	NOTE	If “Yes” will be selected, version update will start.

•Make sure that the LAN cable is connected to this player. (See page 18.)

•Make sure to perform the communication settings. (See pages 42–44.)

•It may take time to access and download the update depending on the internet connection and other factors.

Yes

No

•If the latest firmware version has been already updated, nothing is displayed on the screen.

CAUTION

•Do not remove the LAN cable or unplug the AC cord while downloading or updating software.

2Press ENTER to start updating.

Downloading latest firmware…

Version : yyyyyyyyyy

30%

3When the software is successfully updated, a screen is displayed indicating that the update process is completed.

•If the update has failed, an error message appears. Retry to perform the update after checking if the LAN cable connection (page 18) and internet settings (pages 42–44) are performed properly.

4Press POWER to turn off the player before using again.

Setup

1Press SETUP to display the Menu screen.

2Press a/b to select “Settings”, then press d or

ENTER.

3Press a/b to select “Software Update Settings”, then press d or ENTER.

4Press a/b to select “Auto Update Setting”, then press d or ENTER.

5Press a/b to select “Yes”, then press ENTER.

•After this, an internet connection will be made automatically every time this player is turned on.

46