Sharp BD-HP52U operation manual Smart Settings

Page 42

SETTINGS

Audio Out

You can set the audio output when connecting to SURROUND equipment.

1This sets the audio output connected to SURROUND equipment.

Item

HDMI Output: Select this when you connect using HDMI OUT terminal.

Digital Output: Select this when you connect using DIGITAL AUDIO OUT terminal (OPTICAL).

2ch Audio Output: Select this when you do not use SURROUND sound equipment.

2You can set the audio output mode for each output terminal.

1This sets the audio output mode for HDMI OUT terminal when selecting “HDMI Output”.

NOTE

•When the secondary audio is set to “On”, PCM is automatically selected as the audio output mode.

Dynamic Range Control

This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog.

Item

Normal: The same audio output range is played as the original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialog portion can be heard easily. (If the audio sounds abnormal, set to “Normal”.)

Auto: When you play back audio in the Dolby TrueHD format, the dynamic range is automatically adjusted.

*Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers.

Smart Settings

Quick Start

Item

Bitstream:

PCM (Surround):

•Select this when connecting to HDMI equipment with a built-in decoder for DOLBY DIGITAL, etc.

•Setting to Bitstream will output each audio signal by Bitstream.

•Select this when connecting to multi-channel HDMI equipment.

•Setting to PCM (Surround) will output by LINEAR PCM by decoding audio signals recorded in each audio output mode such as

DOLBY DIGITAL, DTS.

This turns the Quick Start function on and off. When the Quick Start function is on:

•The startup time of the Player is reduced.

•However, power consumption will increase.

When the Quick Start function is off:

•The player will enter the low power consumption mode when in standby condition.

Item

Yes, No

NOTE

•When “Quick Start” is set to “Yes”, the Player requires some time to turn off.

2This sets the audio output mode for DIGITAL AUDIO OUT (OPTICAL terminal) when selecting “Digital Output”.

Item

Bitstream:

•

Select this when connecting to

 

 

SURROUND equipment with

 

 

a built-in decoder for DOLBY

 

 

DIGITAL, etc.

 

•

Setting to Bitstream will output

 

 

each audio signal by Bitstream.

PCM:

•

Select this when connecting to 2

 

 

channel stereo audio equipment.

 

•

Setting to PCM will output by

 

 

converting each audio signal into

 

 

PCM 2 channel audio signal.

NOTE

•See page 50 for information on output of next generation audio formats.

Auto Power Off

This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes.

Item

Yes, No

Front Display/LED

If you feel that the indicators on the player’s front display are too bright when watching movies, you can turn them off except for the ON/STANDBY indicator.

Item

On, Off

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents BD-HP52U Page English Contents What would you like to do with this Player? Additional Safety Information Dear Sharp CustomerPrecautions when cleaning this product IntroductionTypes of Discs that Can Be Used with This Player About DiscsBlu-ray Disc Discs that Cannot Be Used with This PlayerAbout Discs About the Jpeg file formatAbout the MP3 file format About Disc Contents Copyright Disc PrecautionsImportant Information Energy Star Program InformationUnpacking Adjust settingsGetting Started Selecting equipment to connectMain Unit Rear Major ComponentsMain Unit Front Hdmi cable holder on the rear of the main unitRemote Control Unit Major ComponentsKeylock function Analog audio connection Introduction to ConnectionsVideo terminals/jacks on this Player Broadband Internet connectionThis Player Connecting to the Hdmi TerminalVideo Connections Equipment with an Hdmi terminalConnecting to the Component Jacks Video ConnectionsVideo equipment with component jacks Connecting to the Video Jack Video equipment with a video jackYou can enjoy the images through the video jack To Optical Input terminal Connecting to the Digital Audio Terminal or Audio JacksAudio Connections White RedBroadband Internet Connection Connecting to the Ethernet terminalPerform the communication settings. Pages Example of a Broadband Internet ConnectionConnecting the Power Cord Loading the Batteries in the Remote ControlApproximate operating range of remote control Before Starting PlaybackTurning the power on Turning the Power On Entering standbyIndicators on the Player Before Starting PlaybackChanging the on-screen display language Language SettingOperating a Sharp TV Using the Remote Control TV function controlUsing Aquos Link Controlling the Blu-ray disc player using Aquos LinkTurning Off the LCD Backlight and Indications Press a/b to select On, then press Enter Netflix service functionRSS Reader function Press a/b to select the desired channelBD/DVD Video Playback BD/DVD/CD PlaybackLoading a Disc Displaying the disc informationBD/DVD Menus Using the disc menuUsing the pop-up menu Start playback by selecting a title from the top menuTo remove the secondary video, press PinP again Enjoying Bonusview or BD-LIVEVirtual Package PrimarySecondary Audio/video audio/videoDVD-R/-RW VR format / BD-RE/-R Bdav format Playback Press Hstop to stop playbackOn the next Playing back the title you stopped while being played Sorting the titlesPlayback by selecting a Playlist BD/DVD/CD Playback About Title ListPlayback from the beginning Operation procedure for the Functions menuAudio CD Playback Playback by selecting a trackTo play another file during Playback Audio Data MP3 File PlaybackPlaying back Audio data MP3 files To skip the file during PlaybackDisplaying Still Images Jpeg files Displaying Still Images Jpeg filesPlaying back Slide Show Playback Functions Setting slide show speed/repeat playbackWhen playing back a DVD Fast Forward/Reverse SearchRepeat Playback of a Title or Chapter Repeat Playback Pause/Frame Advance PlaybackSlow Playback Playback FunctionsPartial Repeat Playback Repeat Playback of a Specified Part Switching SubtitlesStereo is displayed. Audio cannot be switched Displaying the Audio InformationSwitching the Angle Displaying the Angle MarkSettings During Playback Function control operation procedureFunction Control Settings During Playback Functions which can be setWhen setting the password for the first time Basic Operation for Playback SettingEnter your 4-digit password Common operationsAudio Video Settings Smart Settings Version Playback SettingOn Screen Language SystemCommunication Setup Select Next, then press EnterEnter your DNS address. Enter your DNS address Option Ethernet Connection Speeds Press a/b to select Complete, then pressInput character list Operation procedure for inputting characters manuallyPress a/b to select the desired input mode 123 Press c/d to select a number/character, then press EnterBefore using the USB memory device USB Memory ManagementUpdate process Software Update SettingsAuto Update from Network SetupManual Update from Network If you have not yet set the password, go to step Manual Update from USB memory deviceEnter the 4-digit number using Press Enter to start checking data in the USB memory deviceWait several minutes and do not unplug the AC cord Language List Country Code ListLanguage Code List About Output of Next Generation Audio FormatsRS-232C port specifications Basic Operation TroubleshootingPower Disc PlaybackTroubleshooting Picture SoundNetwork To Reset this Player On-screen Error MessagesTroubleshooting Other Error message Possible Error Suggested SolutionAbout Software License Information on the Software License for This ProductSoftware License Notice Playback SpecificationsGeneral Input/OutputGlossary DVD+/-R pages 6 Glossary DVD video pages 6 Linear PCM SoundMP3 Pages 6, 7 DVD+/-RW pages 6Resume playback Glossary Progressive formatRegion code RSSValid for warranty service in the U.S. and Puerto Rico only Page Sharp Electronics Corporation
Top Page Image Contents