Sharp BD-HP210U Audio CD Playback, Playback from the beginning, Playback by selecting a track

BD/DVD/CD Playback

Audio CD Playback

AUDIO CD

Playback from the beginning

1Load an audio CD.

•The CD screen is displayed.

(The CD screen is displayed only when a compact disc recorded in the CD-DA format is inserted.)

•Playback may begin automatically, depending on the disc.

Track 01				Functions
				1 / 12
				00 : 00 : 11
	0:00		5:16	3	L+R
				Off
1	Track 01		5:16
2	Track 02		5:10
3	Track 03		5:23
4	Track 04		5:03
5	Track 05		4:44
6	Track 06		5:08		1 / 12
	Select	Enter			Functions
				D

2Press d PLAY if playback does not begin automatically or playback is stopped.

3Press HSTOP to stop playback.

Resume playback function

•If you press d PLAY next, playback will resume from the point where the Player was previously stopped. To

playback from the beginning, cancel resume mode by pressing HSTOP, then press d PLAY. (This may not work depending on the type of disc. In this case, open the disc tray or enter standby.)

NOTE

• Resume playback may not function depending on the disc.

Playback by selecting a track

1Press a/b to select the track, then press ENTER during playback or when playback is stopped.

• Playback of the selected track will begin.

Track 03				Functions
				3 / 12
				00 : 00 : 11
	0:00		5:23	3	L+R
				Off
1	Track 01		5:16
2	Track 02		5:10
3	Track 03		5:23
4	Track 04		5:03
5	Track 05		4:44
6	Track 06		5:08		3 / 12
	Select	Enter			Functions
				D

2Press HSTOP to stop playback.

Operation procedure for the “Functions” menu

1Press D (Yellow) (Functions) when the CD screen is displayed.

• The “Functions” menu is activated.

Track 03				Functions
				3 / 12
				00 : 00 : 11
	0:00		5:23	3	L+R
				Off
1	Track 01		5:16
2	Track 02		5:10
3	Track 03		5:23
4	Track 04		5:03
5	Track 05		4:44
6	Track 06		5:08		3 / 12
	Select	Enter		Return	Track select
				D

2Press a/b to select the desired setting, then press ENTER.

•When playback is stopped, only “Track” can be selected.

•For a description of each setting, see “Functions which can be set” (Page 34).

3Press a/b/c/d to set, then press ENTER.

•Operations vary depending on the setting. Follow the operation instructions on the screen.

4Press nRETURN or D (Yellow) to exit the “Functions” menu.

NOTE

• The displayed items vary depending on the disc.

28