Sharp BD-HP210U operation manual Quick Start, Auto Power Off, Audio Out, Dynamic Range Control

Page 39

SETTINGS

Audio Out

You can set the audio output when connecting to SURROUND equipment.

1This sets the audio output connected to SURROUND equipment.

Item

HDMI Output: Select this when you connect using HDMI OUT terminal.

Digital Output: Select this when you connect using DIGITAL AUDIO OUT terminal (OPTICAL).

2ch Audio Output: Select this when you do not use SURROUND sound equipment.

2You can set the audio output mode for each output terminal.

1This sets the audio output mode for HDMI OUT terminal when selecting “HDMI Output”.

Dynamic Range Control

This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog.

Item

Normal: The same audio output range is played as the original recorded audio output range.

Shift*: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialog portion can be heard easily. (If the audio sounds abnormal, set to “Normal”.)

Auto: When you play back audio in the Dolby TrueHD format, the dynamic range is automatically adjusted.

*Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers.

NOTE

•When the secondary audio is set to “On”, PCM is automatically selected as the audio output mode.

Quick Start

This turns the Quick Start function on and off. When the Quick Start function is on:

Item

Bitstream:

PCM (Surround):

•Select this when connecting to HDMI equipment with a built-in decoder for DOLBY DIGITAL, etc.

•Setting to Bitstream will output each audio signal by Bitstream.

•Select this when connecting to multi-channel HDMI equipment.

•Setting to PCM (Surround) will output by LINEAR PCM by decoding audio signals recorded in each audio output mode such as

DOLBY DIGITAL, DTS.

•The startup time of the Player is reduced.

•However, power consumption will increase.

When the Quick Start function is off:

•The player will enter the low power consumption mode when in standby condition.

Item

Yes, No

NOTE

•When “Quick Start” is set to “Yes”, the Player requires some time to turn off.

2This sets the audio output mode for DIGITAL AUDIO OUT (OPTICAL terminal) when selecting “Digital Output”.

Item

Bitstream:

•

Select this when connecting to

 

 

SURROUND equipment with

 

 

a built-in decoder for DOLBY

 

 

DIGITAL, etc.

 

•

Setting to Bitstream will output

 

 

each audio signal by Bitstream.

PCM:

•

Select this when connecting to 2

 

 

channel stereo audio equipment.

 

•

Setting to PCM will output by

 

 

converting each audio signal into

 

 

PCM 2 channel audio signal.

NOTE

•See page 44 for information on output of next generation audio formats.

Auto Power Off

This sets the Player so that power is automatically shut off if playback is stopped for about 10 minutes.

Item

Yes, No

AQUOS LINK

This lets you set the Player to receive the control signal from the AQUOS LINK remote control via the HDMI cable.

Item

Yes, No

NOTE

•For details, refer to the operation manual of TV.

•If “Component” is selected from the “Video Out Select” menu, AQUOS LINK is not available. Select “HDMI” if you want to use AQUOS LINK features.

Settings

37

Page 38 Page 40
Image 39
Page 38 Page 40
Contents
BD-HP210U Page English Contents What would you like to do with this Player? Dear Sharp Customer Additional Safety InformationIntroduction Discs that Cannot Be Used with This Player About DiscsBlu-ray Disc Types of Discs that Can Be Used with This PlayerAbout the Jpeg file format About DiscsAbout Disc Contents Energy Star Program Information Disc PrecautionsImportant Information CopyrightSelecting equipment to connect Adjust settingsGetting Started UnpackingMajor Components Main Unit FrontMain Unit Rear Remote Control Unit Major ComponentsKeylock function Broadband Internet connection Introduction to ConnectionsVideo terminals/jacks on this Player Analog audio connectionEquipment with an Hdmi terminal Connecting to the Hdmi TerminalVideo Connections This PlayerConnect audio equipment or the audio terminals of the TV. Connecting to the Component JacksVideo Connections Video equipment with component jacksYellow Connecting to the Video JackVideo equipment with a video jack You can enjoy the images through the video jackConnecting to the Digital Audio Terminal or Audio Jacks Audio ConnectionsTo Optical Input terminal To LAN terminal Connecting to the Ethernet terminalBroadband Internet Connection Example of a Broadband Internet ConnectionBefore Starting Playback Loading the Batteries in the Remote ControlApproximate operating range of remote control Connecting the Power CordEntering standby Turning the Power OnTurning the power on Indicators on the PlayerChanging the on-screen display language Language SettingOperating a Sharp TV Using the Remote Control Press Setup to display the Setup Menu screenUsing Aquos Link Controlling the Blu-ray disc player using Aquos LinkTurning Off the LCD Backlight and Indications BD/DVD Video Playback BD/DVD/CD PlaybackLoading a Disc Displaying the disc informationStart playback by selecting a title from the top menu Using the disc menuUsing the pop-up menu BD/DVD MenusPlayback Enjoying Bonusview or BD-LIVEVirtual Package DiscThumbnail DVD-R/-RW/BD-RE/-R PlaybackPlayback by selecting a title About Title ListPlaying back the title you stopped while being played Sorting the titles Playback by selecting a PlaylistPlayback by selecting a track Operation procedure for the Functions menuAudio CD Playback Playback from the beginningSlow Playback Playback FunctionsFast Forward/Reverse Search Pause/Frame Advance PlaybackDisplaying the Audio Information Switching SubtitlesStereo is displayed. Audio cannot be switched Partial Repeat Playback Repeat Playback of a Specified PartDisplaying the Angle Mark Switching the AnglePlaying back still images in a selected folder Setting slide show speed/repeat playbackJpeg File Playback Playing back still images in sequenceSettings During Playback Function control operation procedureFunction Control Functions which can be set Settings During PlaybackSettings Basic Operation for Playback SettingEnter your 4-digit password When setting the password for the first timeAudio Video Settings Audio Out Auto Power OffWhen the Quick Start function is off Quick StartVersion Playback SettingSystem Reset Front Display/LEDCommunication Setup − IP address and port number of the proxy serverIf selecting No Go to the next step On the next Press c/d to select Complete, then press Option Ethernet Connection SpeedsPress c/d to select a number/character, then press Enter Operation procedure for inputting characters manuallyPress a/b to select the desired input mode Input character listPress c/d, select Yes, and press Enter Before using the USB memory deviceUSB Memory Management Press a/b, select Erase or Format, then press EnterTo check for the availability of a software Software UpdateAbout Output of Next Generation Audio Formats Country Code ListLanguage Code List Language ListAppendix TroubleshootingPower Basic OperationTroubleshooting Picture SoundNetwork Other On-screen Error MessagesTroubleshooting Network To Reset this PlayerGlossary Linear PCM Sound Glossary Interlace format Region codeJpeg pages 6, 7 Letter Box LB 43Input/Output SpecificationsGeneral PlaybackValid for warranty service in the U.S. and Puerto Rico only Sharp Electronics Corporation