![](/images/new-backgrounds/1313418/31341881x1.webp)
SETTINGS
Communication Setup
This allows you to perform and/or change the communication setting. This setting is required to use
NOTE
•Make sure that the LAN cable is connected to this Player. (See page 18.)
•For manually performing the setting, the following information of the connected router or modem is required. Confirm the information prior to the setting.
−IP address, netmask, gateway, DNS address
•Besides, if specifying a proxy server, the following information specified from your internet service provider is also required. Confirm the information prior to the setting.
−IP address and port number of the proxy server
1Press SETUP to display the Setup Menu screen.
2Press a/b/c/d to select “Settings”, then press ENTER.
3Press a/b to select “Communication Setup”, then press ENTER.
4Press c/d to select “Change”, then press
ENTER.
Current Ethernet setup info.
IP Address | : Auto Setup | ||
Netmask | : Auto Setup | ||
Gateway | : Auto Setup | ||
DNS | : Auto Setup | ||
Proxy | : Not Use | ||
|
|
|
|
Change |
|
| Initialize |
•For initializing the current setting, select “Initialize”, then press ENTER.
Settings
•If selecting “Yes”: The IP address or proxy server name and port number for the proxy server specified from your internet service provider are entered using the screen for inputting characters. (See page 41.)
•If selecting “No”: Go to the next step.
(Continued on the next page)
39