Sharp BD-HP20H operation manual Video Connections, Connecting to the Hdmi Terminal, Steps

Page 17

Video Connections

Connecting to the HDMI Terminal

You will enjoy high quality digital picture and sound through the HDMI terminal.

When you use AQUOS LINK, make sure to use a certiﬁ ed HDMI cable.

STEPS

1:Be sure to turn off this Player and the equipment before making any connections.

2:Firmly connect an HDMI cable (commercially available) to the HDMI terminals (1 and 2).

This Player

Caution:

•HDMI output and Component Video output can not be used at the same time.

•When using an HDMI output, 7.1 ch Digital Output is available.

1 To HDMI OUT terminal

HDMI cable (commercially available)

2 To HDMI input terminal

Projector

TV

AV receiver

Equipment with an HDMI terminal

After connecting

Change the video output to HDMI video out

When you connect both an HDMI cable and a component cable to this player, switch to the output terminals by remote control.

(The video output is not output both terminals.)

1Turn on the power.

2Press HDMI button for 5 seconds, and the change of “Component Video Out” and “HDMI Out” is possible.

•(To switch outputs, it is necessary to keep the button pressed for several seconds.)

Also, when the HDMI button is pressed, the current setting conditions will display while ﬂ ashing (blinking), and then the selected output lamp displays.

3“” or “” is displayed alternately on the front panel display.

NOTE

•When you connect this player to the TV of SHARP with an HDMI cable only and if the TV is on, the video output is changed to HDMI output automatically.

The following setting is unnecessary.

•When you connect to the TV with an HDMI cable only, HDMI video output is set to AUTO. If you don’t get the normal image, select the desired resolution.

•When you are setting HDMI video output besides AUTO, you can only select the resolution that corresponds to the connected TV.

Caution:

•Even when there is no cable connected to the Component video out, switching the output to CP-out (Component video out) is still possible. When CP-out is selected, there will be no signal from the HDMI video out.

o Connection

•Load a disc and start playback. (Pages 25-28)

•If desired, connect audio equipment. (Pages 18-20)

•Refer to AQUOS LINK function. (Pages 24 and 42)

15

Image 17

Contents BD-HP20H Page Power Cord Protection Safety InformationContents What to do ﬁrst Dear Sharp Customer Additional Safety InformationIntroduction Important Safety InstructionsInformation on Disposal for Business Users European Union Other Countries outside the EUBlu-ray Disc About DiscsTypes of Discs that Can Be Used with This Player Quick Reference for Selecting DiscsDiscs that Cannot Be Used with This Player About DiscsAbout Disc Contents Copyright Disc PrecautionsImportant Information Getting Started Adjust settingsUnpacking Selecting equipment to connectMain Unit Rear Major ComponentsMain Unit Front Keylock function Remote Control UnitMajor Components Analogue audio connection Introduction to ConnectionsVideo terminals/jacks on this Player After connecting Change the video output to Hdmi video out Connecting to the Hdmi TerminalVideo Connections StepsVideo Connections Connecting to the Component JacksAfter connecting You will enjoy the images through the S-video or video jack Connecting to the S-video or Video JackVideo jack Yellow To Video jack AV cable supplied InputTo videojackAmpliﬁer Connecting 5.1 ch Speakers through an AmpliﬁerAudio Connections To coaxial To optical Input jack Input terminal Connecting to the Digital Audio Terminal or JackAudio Connections To audio Input jacks White Red Connecting the Audio JacksTo 2CH Audio Output jacks Before Starting Playback Connecting the Power CordLoading the Batteries in the Remote ControlBefore Starting Playback Setting the Remote Control CodeOperating the TV of Sharp Using the Remote Control Language Setting Turning the Power OnSetup Menu operation Using Aquos LinkControlling the Blu-ray disc player using Aquos Link Turning Off the LCD Backlight and IndicationsLoading a Disc BD/DVD/CD PlaybackBD/DVD Video Playback To stop playbackBD/DVD/CD Playback Using the disc menuBD/DVD Menus Start playback by selecting a title from the top menuPlayback by selecting a title BD-R/-RE/DVD-R/-RW PlaybackPlayback from the beginning Playback by selecting a Play List Audio CD PlaybackSorting the titles Playing back the title you stopped while being playedPlayback Functions Switching Subtitles Switching AudioPlayback Functions Partial Repeat Playback Repeat Playback of a Speciﬁed PartPlayback Setting Angle Mark DISPLAY. Switching the AngleDisplaying the Angle Mark Press Angle during playbackFunction Control Settings During PlaybackFunction control operation procedure Functions which can be set Settings During PlaybackComponent Video OUT This sets the resolution of the component video outputTV Type Hdmi Auto Detection SettingsAudio OUT This sets the audio output connected to Surround equipmentOPTICAL/COAXIAL Digital Output or 2ch Audio Output You can set the audio output mode for each output terminalSelected item Description NORMAL, Shift Dynamic Range ControlPress a/b to select Audio Video SETTINGS, then press Enter Basic Operation for Audio Video SettingsExample Setting TV Aspect Ratio under Audio Video Setting Press c/d to select the desired format, then press EnterPress a/b to select Speaker SETTINGS, then press Enter Basic Operation for Speaker SettingsUsing multi channel speakers Using 2 channel speakersPress a/b/c/d to select Test START, then press Enter Checking the setup soundPress a/b/c/d to select the speaker, then press Enter Completing the settings Resetting the setupRepeat steps 9 and 10 until each speaker is reset Press a/b/c/d to select FINISH, then pressSettings Quick Start Disc Language Disc Priority Language Parental ControlFor BD-ROM LevelLanguage Code List Country Code ListPress a/b to select Playback SETTING, then press Enter Basic Operation for Playback SettingExample Setting Parental Control under When setting the password for the ﬁrst timeCommon operation This item is for the customer service settingExample Setting Front DISPLAY/LED Appendix TroubleshootingTroubleshooting Error message Possible Error Suggested Solution On-screen Error MessagesMessages Relating to BD and DVD Occurs if an operation is incorrectDTS GlossaryBD-ROM MPEG-2 GlossaryGeneral SpeciﬁcationsPlayback Input/Output0201 Terms of GuaranteeTINSEA124WJQZ