Sharp BD-HP20H operation manual TV Type, Component Video OUT

SETTINGS

AUDIO VIDEO SETTINGS
TV ASPECT RATIO
• If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the
connected TV changes, you will have to change the “TV ASPECT RATIO” setting.
• You can set the screen aspect ratio of the connected TV, and adjust the video output.
• Select “TV ASPECT RATIO” from “AUDIO VIDEO SETTINGS”.									WIDE 16:9
								WIDE 16:9: Select this
MENU [AUDIO VIDEO SETTINGS]			MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]						NORMAL 4:3
								when connecting to a
AUDIO VIDEO SETTINGS			TV ASPECT RATIO					TV with a 16:9 screen
SPEAKER SETTINGS			TV TYPE
			COMPONENT VIDEO OUT					aspect ratio.
QUICK START
			HDMI VIDEO OUT
AUTO POWER OFF								NORMAL 4:3: Select
			HDMI AUTO DETECTION
AQUOS LINK
			AUDIO OUT		16 : 9		4 : 3	this when connecting to
PLAYBACK SETTING
			DYNAMIC RANGE CONTROL					a TV with a 4:3 screen
FRONT DISPLAY / LED
VERSION						WIDE	NORMAL	aspect ratio.
SOFTWARE UPDATE
SYSTEM RESET
									LETTER BOX,
	MENU [AUDIO VIDEO SETTINGS - TV ASPECT RATIO]
						<When selecting NORMAL 4:3>			PAN SCAN
	TV ASPECT RATIO
	TV TYPE					LETTER BOX: If you connect to a TV with a screen aspect
	COMPONENT VIDEO OUT					ratio of 4:3 and playback a DVD with 16:9 video, the
	HDMI VIDEO OUT
						video will be played back with black bands at the top and
	HDMI AUTO DETECTION
	AUDIO OUT					bottom while maintaining the 16:9 ratio.
	DYNAMIC RANGE CONTROL					PAN SCAN: If you connect to a TV with a screen aspect
		LETTER BOX		PAN SCAN		ratio of 4:3 and playback a DVD with 16:9 video, the video
						will be played back with the left and right sides of the
						image cut off to display in 4:3 screen aspect ratio. (This
						function works if the disc is labelled for 4:3PS.)

TV TYPE

•You can set the TV type connected to this Player.

•This Player can display NTSC discs in native NTSC format for display on multisystem TVs. Select “AUTO” if you have a multi system TV.

•This Player will convert discs recorded using the NTSC system to the PAL system for display on a PAL TV. Select “PAL”, if you have a PAL TV.

	MENU [AUDIO VIDEO SETTINGS - TV TYPE]			AUTO, PAL
MENU [AUDIO VIDEO SETTINGS]
AUDIO VIDEO SETTINGS	TV ASPECT RATIO
	TV TYPE
SPEAKER SETTINGS
	COMPONENT VIDEO OUT
QUICK START
	HDMI VIDEO OUT
AUTO POWER OFF
	HDMI AUTO DETECTION
AQUOS LINK
	AUDIO OUT
PLAYBACK SETTING
	DYNAMIC RANGE CONTROL
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
		AUTO	PAL
SYSTEM RESET

NOTE: Some disc may not display properly when you play a NTSC disc on a PAL system.

COMPONENT VIDEO OUT

• This sets the resolution of the component video output.

MENU	[AUDIO VIDEO SETTINGS]	MENU	[AUDIO VIDEO SETTINGS - COMPONENT VIDEO OUT]		1080i, 720p,
					576/480p,
AUDIO VIDEO SETTINGS		TV ASPECT RATIO			576/480i
SPEAKER SETTINGS		TV TYPE
QUICK START		COMPONENT VIDEO OUT
AUTO POWER OFF		HDMI VIDEO OUT
AQUOS LINK		HDMI AUTO DETECTION
PLAYBACK SETTING		AUDIO OUT
FRONT DISPLAY / LED		DYNAMIC RANGE CONTROL
VERSION
SOFTWARE UPDATE			1080i	720p
SYSTEM RESET			576/480p	576/480i

•Some TV are not fully compatible with the Blu-ray disc player, which may cause the image distortion. In this case, press “COMPONENT RESET” on the remote control for fi ve seconds. Component video out will be reset to 576/480i (factory preset value).

Caution: HDMI output and Component output can not be used at the same time.

34