Sharp BD-HP20H Video Connections, Connecting to the Component Jacks, After connecting

Video Connections

Connecting to the Component Jacks

You will enjoy accurate colour reproduction and high quality images through the component jacks.

STEPS

1:Be sure to turn off this Player and the equipment before making any connections.

2:Firmly connect a component video cable (commercially available) to the component jacks (1 and 2).

Caution:

•HDMI output and Component Video output can not be used at the same time.

This Player

(Red)

(Blue)

(Green)

1 To COMPONENT VIDEO OUT jacks

Component video cable (commercially available)

2 To component video input jacks

(Red)

(Blue)

(Green)

COMPO- NENT IN

PR (CR)

PB

(CB)

Y

Caution:

•Press HDMI button for 5 seconds, and the change of “Component Video Out” and “HDMI Out” is possible.

•Even when there is no cable connected to the HDMI video out, switching the output to HO-out (HDMI video out) is still possible.

When HO-out is selected, there will be no signal from the Component video out.

	VCR
	Connect directly
Blu-ray Disc	LCD TV
Player

NOTE

•Connect the Blu-ray disc player to LCD TV directly. If you playback the image via VCR, the image may deteriorate due to the copy guard function.

•When you record the programme where copyright is protected, the copy guard function is activated automatically; the programme can not be recorded correctly. Also, the playback image via VCR may deteriorate due to this function. However, this is not a malfunction. When you watch the programme where copyright is protected, we recommend that the Blu-ray disc player be connected to LCD TV directly.

Projector TV AV receiver

Video equipment with component jacks

After connecting

• Connect audio equipment or the audio terminals of the TV. (Pages 18-20)

16