Introduction
Operating with the remote control
Point the remote control at the remote sensor and press the buttons.
Distance: About 5 m from the front of the remote sensor.
Angle: About 30° in each direction of the front of the remote sensor.
*Do not expose the remote sensor of the
Notes:
•Direct the remote control at the remote sensor of the
•When using the remote control, press the buttons at intervals of about 1 second to ensure the correct mode of operation.
•Do not drop or give the remote control a shock.
•Do not leave the remote control near an extremely hot or humid place.
•Do not spill water or put anything wet on the remote control.
•Do not open the remote control.
•If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.
Front Panel Display
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
DVD
TRK
10 | CD |
1080ip
11 720p 576ip 480ip
2 c h MUlTI
HDMI
1.PLAY indicator Lights when playing.
2.PAUSE indicator Lights when paused.
3.DVD indicator
Lights when a DVD disc is inserted.
4.CD indicator
Lights when a CD disc is inserted.
5.TRK (TRACK) indicator
Lights when a CD/MP3 disc is inserted.
6.Audio Channel indicator
Shows the audio channel of the current DVD/BD.
7.Camera Angle indicator
Illuminates when a BD/DVD disc that has multiple camera angle is inserted.
8.HDMI indicator
Lights when HDMI TV is connected.
9.
(REPEAT) indicator
Illuminates when REPEAT is pressed.
12
10.
/ 
Skip indicator
Lights while in fast forward / fast reverse mode.
11.Resolution indicator
Shows resolution of video output.
12.Character indicators
Displays various kinds of information such as elapsed time or message, etc. (See example shown as below.)
Indicates the elapsed time
Closing the disc tray
Indicates that a
Loading a disc
10